How To Reset Water Filter Light On Samsung French Door Refrigerator

The majority of Samsung refrigerators are equipped with filter low-cal indications, which warning the user when the water filter needs to be changed.

It besides means that after replacing the filter in the Samsung refrigerator, you will need to reset the filter low-cal in the apparatus.

Simply why is this the instance?

Generally speaking, the maximum number of months that a water filter can exist used is vi.

Still, depending on the type of water that passes through the waterline, it may be necessary to replace the waterline.

Consider that if the water is hard in your area, y'all may need to replace the filter inside iii to 4 months of installing information technology.

You will not be able to make up one's mind that your filter needs to exist changed until yous notice a divergence in flavor, which you would not find without the filter low-cal.

Samsung DA29-00020B, HAF-CIN/EXP Premium Refrigerator Water Filter (White, 2 pack) — How to Reset Filter Light on Samsung Refrigerator

The Operation of the Samsung Water Filter Indicator

When the water filter is nonetheless in good working society, the Samsung water filter displays a blue or green hue, depending on the model you lot have installed.

When it has been in the h2o for 5 months or 450 gallons, the colour turns orange or lite pink.

This colour shift is oft an indication that it is fourth dimension to replace the water filter organisation.

Your water filter indicator volition plow cherry-red subsequently half-dozen months or 500 gallons of h2o have been used.

When you lot notice this red light, it'south time to replace the water filter.

The longer you wait, the more likely it is that yous will meet particles in your drinking water.

Furthermore, you will need to change your water filter more often than every six months if you alive in a region where at that place is excessive limescale in the water supply.

Filter indicator and ice type and filter change button are highlighted in blue from menu in the refrigerator

Indicator for the presence of a water filter

In club for the water filter indicator light to turn orange after v months or 450 gallons of h2o, and so red after vi months or 500 gallons of h2o, it must first turn orange.

The color of the low-cal depends on the model you accept. It might be either dark-green or blue.

It is necessary to locate the multi-function button(s) on your display that controls the water filter indication in order to restore it to its default setting.

Then push and hold the push button(s) for a few seconds until the lite turns green.

Exemplifications of Diverse Models

NOTE:

The models depicted in the photographs below are but a few samples of a variety of designs.

You lot should examine the display screen on your refrigerator and seek characteristics that are comparable to these.

What you lot need to know most how to reset the filter light on a Samsung refrigerator (steps to follow on different models)

When using a Samsung refrigerator, y'all must concur down the FILTER RESET button for approximately two seconds in guild to turn off the red filter icon on the door.

If you lot are unable to locate the FILTER RESET push button on your refrigerator – which is typically located on the dispenser controls – consult your possessor'due south transmission for assistance (on the front end of your refrigerator).

In order to operate other models, you lot must press and hold downwardly either the "Water FILTER" button or the "Water ice/H2o" push button for three seconds.

Now, because the Samsung refrigerator water filter reset technique differs from model to model, we've explained the correct Samsung refrigerator water filter reset approach for each model in the following sections to assist you lot get back on rail (typical steps).

Samsung fridge model RF28K9070SR has a filter reset.

To reset the filter on your RF28K9070SR model, press and concur the ICE-MAKER button for approximately 3 seconds after turning it off.

The filter indication will be reset as a consequence of this action.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

The CRUSHED/HOLD button on your RF23J9011SG/AA must be held downwards for three seconds in lodge to reset the water filter light.

The color of its indicator should transition from red to OFF instead of staying on.

Steps for resetting the water filter on a Samsung fridge with a French door design Samsung refrigerators, such equally the Samsung fridge RF260/BEAESR/AA, are available.

Subsequently installing a new water filter, printing and hold downward the Warning/HOLD option for three seconds to turn off the red warning light that has shown.

Please proceed in mind that, for devices with internal controls, you must push button and concur down the buttons Refrigerator+POWER COOL (at the same time) for a total of three seconds.

Model DA29-00003G of the Samsung refrigerator has a filter reset light.

To reset a replacement warning light, printing and hold the Warning/HOLD button for three seconds while the light is off.

Model number RF24R7201SR/AA of the Samsung refrigerator.

If you accept recently replaced the filter in your Samsung RF24R7201SR/AA fridge, pushing and holding the FILTER RESET button (for iii seconds) should turn off the reset indicate on the refrigerator.

Samsung refrigerator water filter reset RF28K9070SR/AA

The CRUSHED ICE button must be pressed and held down for iii seconds in order to articulate the h2o filter message.

RF23J9011SR is the Samsung fridge filter reset code.

If y'all have a Samsung fridge with model number RF23J9011SR, press and hold the button "CRUSHED/Concur" for iii seconds to reset the water filter alarm.

RF263BEAESR is the Samsung refrigerator filter reset code.

The following procedure should be followed if your RF263BEAESR Samsung fridge h2o filter does non reset automatically:

For three seconds, press and concord the Ice TYPE/Water button on the controller.

Instructions for resetting the Samsung RF28R7351SG h2o filter (applies for most 4 doors Samsung refrigerators)

The CRUSHED LIGHT INDICATOR button must exist pressed and held down for iii seconds in order to reset the warning betoken.

If the reset light indicate does non turn off, there are some other options to attempt.

In a nutshell, if replacing a new filter did non result in the red light turning off, you can besides attempt the post-obit:

Check to see whether any of the buttons are locked.
Make certain that the buttons are truly "unlocked," or else the Samsung refrigerator filter reset performance will not function properly.

For the methods on how to unlock the controls, y'all can refer to your handbook volume once more than if yous crave them.

Ensure that the filter seating is correct.

It is possible that the filter warning light is notwithstanding blinking because the newly installed filter was non properly placed. Open up the door, expect at the plumbing equipment, and make sure it's exactly in place.

Cheque to encounter that the proper filter was installed.
If you lot did non use a legitimate product, the calorie-free notification may not go away, and you may need to swap out the replacement filter to get information technology to work again (as a last resort).

OUR FINAL THOUGHTS

We hope y'all have gained a better agreement of how to reset the filter lite on a Samsung refrigerator (and probably you have already gotten rid of the alarm).

One last point to mention: nigh Samsung fridge models are equipped with a "LOCK" button, which is used to lock the controls, and it is frequently this push button that is at a fault when the Samsung fridge h2o filter light does not turn off when you try to turn it off.

It volition be necessary for you to unlock the controls in order for the water filter light to be successfully reset; thus, endeavour to hold down the flashing LOCK button for three seconds and then retry the procedure.

Naturally, the unlock technique varies from model to model, so if the steps outlined higher up do not work, consult your handbook for the right approach.

Frequently Enquire QUESTIONS

The filter low-cal on my Samsung fridge won't turn off. What should I do?

The majority of the time, the technique to do a Samsung refrigerator water filter reset consists of pressing and belongings down either of these buttons for three seconds each.

The FILTER RESET push is located on the right-hand side of the screen.

The "WATER FILTER" button or the "ICE/H2o" button are both available.

However, if your Samsung refrigerator filter lite does not reset, commencement bank check to see if the buttons have been locked and so unlock them earlier attempting again.

What is the procedure for turning off the filter light on my Samsung?

Information technology is necessary to locate the multi-function push button(s) on your display that controls the h2o filter indication in gild to restore it to its default setting.

So push and agree the push(southward) for a few seconds until the low-cal turns green.

What is causing my Samsung refrigerator's filter lite to not reset?

If the light does non reset subsequently several attempts, contact a professional person to service the filtration organisation.

Once yous have replaced the filter with a new one, the indicator light should return to its original blueish color and role properly.

The red filter indicator on your Samsung fridge will not turn off unless you reset it manually.

How-do-you-do, I'm Khelly! I am your tech expert for all your Samsung Products and Information needs. Life is complicated so, finding solution to your tech problems shouldn't exist. Let me help you with that!????